Ignition Key Switch

Ignition Key Switch 

• 10 minutes installation and 10 minutes removal
• 2 keys
• Without the key, bike can not be started using electric starter, kickstart or by push

Compatible with:

KTM:

• KTM EXC 125 – 530 2004-2006
• KTM XCW/XCW-F 4 Strokes 2006-2016
• KTM XCW 2 Strokes 125/150/200/250/300 2008-2022
• KTM SXF/XCF 250/350/450 2007-2022
• KTM EXC 2 and 4 stroke 2017-2022 for Australian and European Market

Husaberg:

• All models 2013-2014

Husqvarna:

• Husqvarna 125-501 2014-2016 ALL EXCEPT FE-S MODELS
• Husqvarna 125-501 2017-2020 NOT FE, US MODELS
• Husqvarna FE 2017-2022 2 and 4 stroke for Australian and European Market

USER MANUAL:

3 last photos in the gallery show how to connect the ignition key switch

1. Clip into the cube on the right side of the head tube (in line)

2. The connector with transparent insulation should also be connected in series with the yellow and black cable going to the left switch on the steering wheel (it's good to insert it into these connectors. If it was loose, gently bend it with a screwdriver) - it should be tightly fastened.

3. The cable with the circle should be placed on the ground, it can be, for example, a meter mounting. Check if there is good contact.

4. You can zip the plugs to keep them sticky