PHDS Supplement to Steering Damper Mount KTM HUSQVARNA GAS GAS 2024 UP ALL ENDURO/MX MODELS
New in
PHDS Supplement to Steering Damper Mount KTM HUSQVARNA GAS GAS 2024 UP ALL ENDURO/MX MODELS
PHDS Supplement to Steering Damper Mount 2024 UP KTM HUSQVARNA GAS GAS ALL ENDURO/MX MODELS
Sterring damper installation allowing the use of handlebar mounts with the PHDS vibration damping system from X-Trig
or similar and old handlebar mounts.
Only available for sale with steering damper mount sets. We do not sell it separately!
When screwing the handlebar mounts, PHDS or others, you will receive two screw lengths in the set, or
if you use other longer screws, you will need to raise the handlebar.
Make sure that the screws do not protrude beyond the edge of the hole in the steering damper mounting element.
The rubber elements used in tripple clamps allow for slight movement. Protruding screws may damage the tripple clamp.
You are responsible for the quality of this assembly. We can't predict what you'll want to screw onto it.
Be careful when lifting the handlebar up. Use common sense! Remember that moment is force times arm. Where the arm
is the height of the lift and the force is your weight applied to the handlebar.
If you want to use the steering wheel assembly from the set because you want to move the steering wheel forward,
just drill the thread with a 10.5 mm drill and use it to screw it through the steering damper mounting to the triple clamp.
Think twice because this step is irreversible ;)
Compatible with:
KTM 2024 up TBI/ EXC-F/XC/XC-F
Husqvarna 2024 up TBI 150-300 FE 250-501
GAS GAS 2024 up EC 250-300 EC 250F- 500F MC 125-250 MC 250F-450f
To download
Ask a question
Write your opinion